Borderless printing can remove more than the white border: it can also remove a little of your photograph. Before you move every face toward the center, separate two different causes of cropping: a shape mismatch and the printer’s expansion setting.
Once you know which one you are seeing, you can choose between filling the paper, preserving the whole composition, or preparing a different crop. One proof print is usually more informative than repeatedly sending the same file with unexplained setting changes.
Recognize the two crops
Your photograph has a width-to-height ratio, and your paper has its own ratio. If those shapes differ, a layout that fills the entire sheet must either crop part of the image, distort it, or change the layout.
For example, a 4:3 image and a 6-by-4-inch landscape print are different shapes. Filling that 3:2 sheet without stretching the picture requires removing some image area along one dimension.
Borderless expansion is a separate step that can occur even when the photo and paper already have matching proportions. The printer may enlarge the image slightly beyond the sheet boundaries so that small placement variations do not leave a white sliver.
Canon’s TS5300-series manual explicitly describes this enlargement and its possible edge cropping. Its amount-of-extension control is an example of a model-specific setting, rather than a control you should expect every printer or app to offer.
Read the photo shape before the printer dialog
Open a copy of the image in your editing or layout application and check the crop ratio. A phone picture, a scanned print, and an image downloaded from a shared album may all have different proportions.
Do not judge the ratio from a small preview surrounded by a white application window. Check the image itself and the dimensions of the intended print area.
Imagine a group portrait with people standing close to both short edges of the frame. If a fill crop already cuts off a person’s shoulder on screen, changing printer expansion will not restore that shoulder in the final layout.
Try a crop preview using the intended paper ratio before doing any permanent editing. Move the crop deliberately and check faces, hands, signs, and architectural details near every edge.
Keep the original file intact while you explore these versions. Name the working copy by its intended print size so that a later reprint does not accidentally use a crop prepared for a different sheet.

Check the supported paper combination
Look up borderless support for your exact printer model, paper size, media type, and feed path. Support for ordinary 4-by-6 photo paper does not establish support for every custom sheet or every material of a similar size.
Epson’s borderless troubleshooting guidance tells you to use a compatible paper type and size and to inspect the expansion setting. That is a useful reminder to establish the supported combination before treating a missing borderless option as an application error.
Check both the application and the printer settings because one may pass instructions to the other. A saved preset called “Photos” can still contain a previous paper size, media setting, or bordered layout.
Write down the settings used for your proof instead of relying on the preset name. Include the exact printer, paper, layout mode, and expansion choice when that control is available.
Make one diagnostic image with edge markers
Use a duplicate image or a simple original test drawing and place small numbered marks progressively inward from each edge. Put a recognizable center mark in the middle so that you can distinguish a centered crop from a shift to one side.
Keep those marks outside your real family photograph; they belong on a separate diagnostic copy. Choose a spacing that is easy to inspect with a ruler, and label it as a test rather than assuming it is a printer calibration standard.
Print one sheet using your intended paper and settings, then compare the physical marks with the preview. Note which edge marks survive and whether the loss looks similar on opposite sides.
The test does not certify the amount of cropping for every future print. It shows what happened with that particular file, paper, application, and setting combination.
Change one setting and compare the proof
If your model offers an extension or expansion control, read its manual before reducing it. Less extension can preserve more of the edges while increasing the chance that a white sliver appears.
Keep the photo crop and paper choice unchanged while comparing two expansion settings. If you change the crop, paper, and expansion together, the next print cannot tell you which choice caused the difference.
Inspect the whole sheet rather than only the side that first caught your attention. You may solve a missing foot at the bottom while creating a white strip at the top.
Do not assume “minimum” means no cropping or “maximum” means higher quality. Those labels describe the particular adjustment in its own interface, and their exact effect depends on the printer workflow.
If there is no suitable adjustment, keep a little more breathing room in the composition or use a border. Repeatedly enlarging the original image is unlikely to recover content that the fill operation already placed outside the sheet.
Plan critical details inward
When you prepare a new photo for a borderless print, keep important content away from the final edge. The amount of room you need should come from the printing workflow and a proof, rather than a universal inset number.
Think beyond faces: a date caption, a pet’s ear, a small signature, or the top of a building can be the detail that makes the crop feel wrong. Check each edge at a large enough preview size to notice those small losses.
For a gift collage, leave the outermost band visually forgiving and keep essential captions farther inward. You can make that layout choice while preserving the original photos separately.
Do not stretch the picture unevenly just to force all four edges onto the paper. If preserving a subject requires changing its proportions, a bordered print or a different paper ratio is usually a clearer compositional choice.
Use a border when the full composition matters
A border can preserve the full image without pretending that its shape matches the sheet. You may get unequal white margins when the image and paper proportions differ, which is a layout result you can choose deliberately.
For artwork reproduction, a photograph with writing at the edge, or an image you intend to mat, that visible margin may be useful. You can also ask a print provider about a suitable sheet size and trimming workflow for the result you want.
Remember that a bordered mode still has a printable area determined by the printer. Keep the image inside that area and inspect the preview rather than assuming every nominal paper dimension is printable.
If you are ordering several sizes of the same portrait, prepare a separate preview for each shape before approving the batch. A successful small print does not show how the composition will fit a taller or more square sheet, even when the lab uses the same paper finish.
Check any text overlay after changing the crop because its position can be tied to the canvas edge rather than the person in the photograph. Treat that final preview as part of preparing the file, before paper and ink enter the decision.
Save a small print recipe
Once a proof looks right, save the working file and a note of the successful settings together. A useful note includes the image crop ratio, paper size and type, application, printer model, and borderless expansion choice.
Keep the proof until you finish the batch so that you can compare later sheets under the same light. If you switch paper, driver, or application, make another proof before relying on the old result.
Borderless printing works best when you decide what can leave the frame before the printer decides for you. Separating the two crops lets you protect the important parts and choose the final edge on purpose.